Torque Drivers

For more information on torque drivers go to torque driver info. I have a large batch of drivers, both internally and externally adjustable, that I will be posting here. If you don't see what you want please check back periodically as these listings will change as I clean and calibrate the drivers. If you are looking for something unusual in the line of torque limiting drivers just ask - I probably have it.

You can pay through PayPal or by credit card using the links below. PayPal is at PayPal.com

(click for larger image) Utica TS-30 - $47 (US shipping) or $54 (intnl shipping) each. Externally adjustable from 4 to 30 lbf in. These are in good to very good used condition - the pictured drivers are representative samples but condition will vary. They have been cleaned and calibrated. These are excellent for most gun work. They cover everything from the brass set screws for my adapters (5 lbf in) to CZ-452 action screws (20-25 lbf in). Best of all you can adjust them yourself.Sold Out
click for larger image Torqueleader / Mountz - $20 (US shipping) or $27 (intnl shipping) each. Internally adjustable and set to 20 lbf in. These are Torqueleader / Mountz / Crane drivers with 1/4" female hex bit holder. These can be set to different torque settings on request. Great tool for ensuring consistent torque and therefore more consistent point of impact between reassembly of the action and stock.	Sold Out
click for larger image Torqueleader / Mountz 1/4 inch Square Drive - $20 (US shipping) or $27 (intnl shipping) each. Internally adjustable and set to 20 lbf in. These are Torqueleader / Mountz / Crane drivers with 1/4" square drive. The come with a square to 1/4" hex converter. These can be set to different torque settings on request. Great tool for ensuring consistent torque and therefore more consistent point of impact between reassembly of the action and stock. These are used tools with some wear. The photos are representative but individual drivers will vary.	Sold Out
Sturtevant Richmont CAL 30 Roto Torq - $37 (US shipping) or $44 (intnl shipping) each. Ajustable from 4 to 30 lbf in or 0.2 to 4 N mSold Out
Crane (Torqueleader) - $27 (US shipping) or $34 (intnl shipping) each. Internally adjustable and set to 20 lbf in. These drivers were made by Torqueleader and are identical to the Mountz I have sold in the past.Sold Out

Paying by Check or Money Order

Please use the PayPal shopping cart to get a total for all the things you are ordering. Print that rather than checking out and send it along with your address and a check or money order for the total amount to:

Eric Brooks
P.O.Box 413
Oneonta, NY 13820
USA

2034